Close This Ad

Rickrack Tulips

Pages

+ enlarge
 

Download this Project


Cut Fabrics


To make the best use of your fabrics, cut the pieces in the order that follows. (Download PDF for patterns) To use fusible web for appliquéing, as was done in this project, complete the following steps. For instructions on how to dye the yellow rickrack, click here. 

1. Lay the fusible web, paper side up, over the patterns. Use a pencil to trace each pattern the number of times indicated in the following cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web piece roughly 1/4" outside the traced lines.

2. Following the manufacturer’s instructions, press the fusible-web shapes onto wrong side of designated fabrics; let cool. Cut out the fabric shapes on the drawn lines. Peel off the paper backings.

From solid tan, cut:
9—6-1/2x10-1/2" rectangles for appliqué foundations

From green print, cut:
9 each of Patterns A, D, and D reversed

From each assorted pink print, cut:
1 of Pattern B

From light yellow print, cut:
9 of Pattern C

From solid brown, cut:
24—1-3/4x10-1/2" strips
24—1-3/4x6-1/2" strips

From pink stripe, cut:
12—1x10-1/2" strips
12—1x6-1/2" strips
8—4-1/4" squares, cutting each diagonally twice in an X for a total of 32 triangles

From dark red print, cut:
2—1-1/2x42-1/2" inner border strips
2—1-1/2x32-1/2" inner border strips
8—4-1/4" squares, cutting each diagonally twice in an X for a total of 32 triangles

From brown print, cut:
5—3-1/2x42" strips for outer border
5—2-1/2x42" binding strips

From yellow rickrack, cut:
9—8-1/2"-long pieces

Pages

Comments

Loading comments...