Cut pieces in the following order. Click on "Download this Project" for patterns. Each pattern is marked with a letter and number. Letters identify specific pieces; numbers indicate order of appliquéing.
To use fusible web for appliquéing, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines. To reduce stiffness in appliqués, also cut 1/4" inside traced lines of each piece and discard centers.
2. Following the manufacturer’s instructions, press each fusible-web shape onto wrong side of designated fabric; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From beige print, cut:
From dark brown print, cut:
5—2-1/2x42" binding strips
4—12x42" strips for outer border
1 each of patterns A-1, B-2, C-3, and D-4
From red print, cut:
1 each of patterns E-5, F-6, G-7, and H-8
12 of Pattern S-19
From green print, cut:
5 each of patterns L-12, M-13, and P-16
4 each of patterns J-10 and N-14
3 of Pattern I-9
2 of Pattern O-15
1 of Pattern K-11
From dark green print, cut:
3 each of patterns O-15 and P-16
2 each of patterns K-11 and L-12
1 each of patterns I-9, M-13, and N-14
From red-and-brown print, cut:
1 of Pattern Q-17
From dark gray print, cut:
1 of Pattern R-18
From yellow-and-brown floral, fussy-cut:
1 of Pattern S-19
From green-and-orange stripe, cut:
2—2x27-1/2" inner border strips
2—2x24-1/2" inner border strips