Cut pieces in the following order. Cut border No. 4 and binding strips lengthwise (parallel to the selvages). Click on “Download this Project” for pattern pieces.
To use fusible web for appliquéing pieces, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines.
2. Following manufacturer’s instructions, press fusible-web shapes onto wrong sides of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From each assorted orange print, cut:
4 of Pattern A (you will use 16 of the 20 total cut)
From each assorted green print, cut:
1 each of patterns B and B reversed
From green-and-black print, cut:
From black print, cut:
From black tone-on-tone, cut:
2—2-1/2x36-1/2" border No. 3 strips
2—2-1/2x32-1/2" border No. 3 strips
2—3-1/2x30-1/2" border No. 1 strips
2—3-1/2x24-1/2" border No. 1 strips
1—14" square, cutting it diagonally twice in an X for 4 setting triangles total
2—7-1/2" squares, cutting each in half diagonally for 4 corner triangles total
From multicolor small floral, cut:
2—1-1/2x32-1/2" border No. 2 strips
2—1-1/2x30-1/2" border No. 2 strips
From multicolor large floral, cut:
5—2-1/2x42" binding strips
2—4-1/2x44-1/2" border No. 4 strips
2—4-1/2x36-1/2" border No. 4 strips
Continued on Page 3: Assemble Blocks
More to check out: