Cut pieces in the following order. Cut tan tone-on-tone sashing strip lengthwise (parallel to selvages).
Click on “Download this Project” for patterns. To use fusible web for appliquéing, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines.
2. Following the manufacturer’s instructions, press each fusible-web shape onto wrong side of designated fabric; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From tan tone-on-tone, cut:
1—3-1/2x43-1/2" sashing strip
2—1-1/2x7-1/2" sashing rectangles
From assorted red prints, cut:
1 of Pattern C
1 each of patterns H and H reversed
From assorted brown prints, cut:
1 each of patterns D, E, G, H, H reversed, I, and I reversed
2 of Pattern F
From assorted gold prints, cut:
From assorted blue prints, cut:
1 each of patterns B and B reversed
From assorted green prints, cut:
From pink print, cut:
From tan plaid, cut:
1 of Pattern A
From green tone-on-tone, cut:
2—1-1/2x42" strips for sashing
From pink tone-on-tone, cut:
3—1-1/2x42" strips for inner border
From brown floral, cut:
4—4-1/2x42" strips for outer border
4—2-1/2x42" binding strips
Continued on Page 3:
More to check out:
House Block Quilt Patterns