Cut pieces in the following order.
Click on “Download this Project” for patterns. To use fusible web to prepare patterns for appliqué, complete the following steps.
1. Lay fusible web, paper side up, over patterns and letters. Use a pencil to trace each pattern and letter the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines. Also cut a 4x15" rectangle from fusible web.
2. Following manufacturer’s instructions, press each fusible-web shape onto wrong side of designated fabric. Fuse 4x15" rectangle to wrong side of white print. Let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From one assorted print, cut:
4—1-1/2" sashing squares
From remaining assorted prints, cut:
2 each of patterns A and B
3 each of patterns A reversed and B reversed
5 of Pattern C
1 each of letters B, D, E, N, and P
2 of letter U
From light tan stripe, cut:
From fused white print rectangle, cut:
From remaining white print, cut:
2 of Pattern D
1 of Pattern E
From light tan print, cut:
From black print, cut:
2—1-1/2x34-1/2" inner border strips
3—1-1/2x17-1/2" strips for sashing and inner border
6—1-1/2x8-1/2" sashing rectangles
6—1-1/2x5-1/2" sashing rectangles
From brown print, cut:
4—2-1/2x42" binding strips
2—3x34-1/2" outer border strips
2—3x19-1/2" outer border strips
Continued on Page 3:
More to check out: