Cut Fabrics
Cut pieces in the following order. Cut border strips lengthwise (parallel to the selvages). Click on “Download this Project” for pattern pieces. To use fusible web for appliquéing, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines.
2. Following the manufacturer’s instructions, press each fusible-web shape onto wrong side of designated fabric; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From white print, cut:
4—18" squares
From green print, cut:
8 each
16 of Pattern B
From turquoise tone-on-tone, cut:
1 of Pattern E
4 of Pattern C
From coral tone-on-tone, cut:
48—2-1/2" squares
1 of Pattern E
4 of Pattern C
From dark red tone-on-tone, cut:
1 of Pattern E
4 of Pattern C
From light green print, cut:
9—2-1/2" sashing squares
1 of Pattern E
4 of Pattern C
From black tone-on-tone, cut:
5—2-1/2x42" binding strips
4 of Pattern D
32 of Pattern G
From large flower print, fussy-cut:
4 of Pattern F
From red print, cut:
48—2-1/2" squares
From black print, cut:
2—5-1/2x48-1/2" border strips
2—5-1/2x38-1/2" border strips
Continued on Page 3: Appliqué Blocks
More to check out:
Flower Appliqué Quilts
Tips for Machine Appliqué
Blossoms and Borders Wall Hanging |
© Copyright
, 
connect with us