Cut pieces in the following order. Make templates of patterns A and B.
To use freezer paper for cutting Pattern C, complete the following steps.
1. Lay freezer paper, shiny side down, over Pattern C. Use a pencil to trace pattern three times. Cut out each freezer-paper circle on drawn line.
2. Place a dab of fabric glue on dull side of each freezer-paper circle, then place glue side down on wrong side of black print. Cut out fabric pieces, adding a scant 1/4” seam allowance to all edges.
3. Using tip of a hot, dry iron, turn fabric seam allowance over edge of each freezer-paper circle and press taut against template. Clip seam allowance if necessary.
From green print, cut:
96 of Pattern A
From each orange or red print, cut:
16 of Pattern B
From black print, cut:
4—2-1/2x42” binding strips
3 of Pattern C
From gold plaid, cut:
From multicolor print, cut:
1—18-1/4” square, cutting it diagonally twice in an X for
4 setting triangles total
Continued on Page 3:
More to check out: