Cut Fabrics
Cut pieces in the following order. (Download PDF for patterns.)
To use fusible web for appliquéing patterns A and B, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out fusible-web shapes roughly 1/4" outside traced lines.
2. Following the manufacturer's instructions, press fusible-web shapes onto wrong side of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From assorted cream prints, cut:
9 - 4-3/4" squares, cutting each diagonally twice in an X for 36 triangles total
From assorted brown prints, cut:
9 - 4-3/4" squares, cutting each diagonally twice in an X for 36 triangles total
From green print, cut:
3 of Pattern A
From red print, cut:
1 - 2-1/2x40" strip for tie
2 - 2-1/4x25" binding strips cut on the bias
2 - 3x21-1/2" strips for casing
2 - 7x11" rectangles for bag bottom
1 - 4x11" rectangle for loop
3 of Pattern B
From purple print, cut:
1 - 13x24" rectangle
From batting, cut:
1 - 13x24" rectangle
1 - 7x11" rectangle
Continued on Page 3: Assemble Blocks
More to check out:
Green Pinwheels
Four-Square Pillow
Dotty Stars |
