Cut pieces in the following order.
Click on “Download this Project” for full-size appliqué patterns.
To felt your own wool, machine-wash it in a hot-water-wash, cool-rinse cycle with a small amount of detergent; machine-dry on high heat and steam-press. To use fusible web for appliquéing pieces, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines.
2. Following manufacturer’s instructions, press fusible-web shapes onto wrong sides of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From multicolor floral, cut:
1—6-1/2x11" lining rectangle
1 of Pattern A
From tan wool, cut:
From pink wool, cut:
1—5-1/2x6" rectangle, trimming each edge with pinking shears
12 of Pattern E (or use 1/4" hole punch to punch twelve 1/4" wool circles)
From blue wool, cut:
17 of Pattern E (or use 1/4" hole punch to punch seventeen 1/4" wool circles)
From pink, blue, brown, and cream prints and florals, cut:
1 each of patterns B, C, D, I, J, M, N, Q, and R
3 of Pattern K
2 of Pattern 0
From green wool, cut:
3 each of patterns F and G
From light green wool, cut:
1 each of patterns H, L, and P
From batting, cut:
Continued on Page 3:
More to check out: