Cut pieces in the following order. Click on “Download this Project" to download the full-size appliqué patterns.
To use fusible web for appliquéing, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines. For less stiff appliqués, also cut 1/4" inside traced lines of each piece and discard centers.
2. Following the manufacturer’s instructions, press fusible-web shapes onto wrong sides of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From cream print, cut:
From pink print, cut:
3 of Pattern A
From dark blue print, cut:
2—1-1/2x36-1/2" inner border strips
2—1-1/2x18-1/2" inner border strips
3 of Pattern B
From yellow print, cut:
3 of Pattern C
From lime green tone-on-tone, cut:
3 each of patterns D and D reversed
From lime green print scrap, cut:
3 of Pattern E
From each of the blue, green, and purple checks, cut:
1 of Pattern F
From each of the blue, green, and purple prints, cut:
From pink leaf print, cut:
From multicolor stripe, cut:
2—5-1/2x28-1/2" outer border strips
4—2-1/2x42" binding strips
2—5-1/2x38-1/2" outer border strips
Finished quilt: 48-1/2x28-1/2"
Finished block: 8x12"
Quantities are for 44/45"-wide, 100% cotton fabrics.
Measurements include 1/4" seam allowances. Sew with right sides together unless otherwise stated.
Continued on Page 3: Appliqué Blocks
More to check out: