Inspired by It Takes Two from designer Camille Roskelley of Thimble Blossoms 
Quilt tester: Laura Boehnke
7/8 yard cream print (blocks)
1/2 yard orange dot (blocks, middle border)
5/8 yard total assorted novelty prints, dots, florals, and stripes (blocks)
1-1/4 yards tan cat print (blocks, outer border, binding)
1/2 yard gray floral (sashing, inner border)
3-1/8 yards backing fabric
55" square batting
Finished quilt: 46-1/2" square
Finished block: 14" square
Quantities are for 44/45"-wide, 100% cotton fabrics. Measurements include 1/4" seam allowances. Sew with right sides together unless otherwise stated
Cut pieces in the following order.
From cream print, cut:
From orange dot, cut:
2—2x37-1/2" middle border strips
2—2x34-1/2" middle border strips
From assorted novelty prints, dots, florals, and stripes, cut:
24—4x7-1/2" rectangles (6 sets of four matching)
From tan cat print, cut:
5—5x42" strips for outer border
5—2-1/2x42" binding strips
From gray floral, cut:
2—2-1/2x34-1/2" inner border strips
3—2-1/2x30-1/2" strips for sashing and inner border
2—2-1/2x141/2" sashing strips
1. Use a pencil to mark a diagonal line on wrong side of each cream print 4" square.
2. Align a marked cream print square with one end of an orange dot 4x7-1/2" rectangle (Diagram 1; note direction of drawn line). Sew on drawn line, then trim excess, leaving a 1/4" seam allowance. Press open attached triangle, pressing seam toward triangle. In same manner, add a marked cream print square to opposite end of rectangle (Diagram 1; again note direction of drawn line). Stitch, trim, and press as before to make a Flying Geese unit. The unit should be 4x7-1/2" including seam allowances.
3. Repeat Step 2 to make four matching Flying Geese units total. Using remaining novelty prints, dots, florals, stripes, and tan cat print 4x7-1/2" rectangles, repeat Step 2 to make 32 Flying Geese units total (four matching units from each fabric).
4. Gather two sets of four Flying Geese units. Sew together one Flying Geese unit from each set to make a Flying Geese pair (Diagram 2). Press seam in one direction. The pair should be 7-1/2" square including seam allowances. Repeat to make four matching Flying Geese pairs total.
5. Referring to Diagram 3, sew together Flying Geese pairs in pairs. Press seams in opposite directions. Join pairs to make a Dutchmen’s Puzzle block. Press seam in one direction. The block should be 14-1/2" square including seam allowances.
6. Repeat steps 4 and 5 to make four Dutchmen’s Puzzle blocks total.
Assemble Quilt Top
1. Referring to Quilt Assembly Diagram, lay out Dutchmen’s Puzzle blocks and gray floral 2-1/2x14-1/2" and 2-1/2x30-1/2" sashing strips.
2. Sew together pieces in each block row. Press seams toward sashing strips.
3. Join block rows and long sashing strip to make quilt center. Press seams in one direction. The quilt center should be 30-1/2" including seam allowances.
4. Sew gray floral 2-1/2x30-1/2" inner border strips to opposite edges of quilt center. Add gray floral 2-1/2x34-1/2" inner border strips to remaining edges. Press all seams toward inner border.
5. Sew orange dot 2x34-1/2" middle border strips to opposite edges of quilt center. Add orange dot 2x37-1/2" middle border strips to remaining edges. Press all seams toward middle border.
6. Cut and piece tan cat print 5x42" strips to make:
- 2—5x46-1/2" outer border strips
- 2—5x37-1/2" outer border strips
7. Sew short outer border strips to opposite edges of quilt center. Add long outer border strips to remaining edges to complete quilt top. Press all seams toward outer border.
1. Layer quilt top, batting, and backing; baste.
2. Quilt as desired.
3. Bind with tan cat print binding strips.