Fast and Fusible Appliqué
Instead of using a needle and thread, secure cutout appliqué shapes with an iron-on adhesive. Many fast-and-easy appliqué projects are meant to be fused, then secured with stitching. Follow the directions in the specific quilting project instructions for how to prepare appliqué pieces for fusing.
Choose a Fusible Web
Choose a lightweight, paper-backed fusible web that can be stitched through unless you plan to leave the appliqué edges unfinished. In that case, use heavyweight, no-sew fusible web. It’s important to follow the manufacturer’s instructions for adhering the fusible web because factors like iron temperature, whether or not to use steam and length of pressing time can all vary by brand.
Cut Out the Shapes
Lay the fusible web, paper side up over the appliqué shape. Trace the shape with pencil, leaving 1/2" between shapes. Roughly cut out around the shape, about 1/4" from the traced line. Press onto the wrong side of your fabric, following the manufacturer’s directions. Cool and then cut on the traced line. Remove the paper backing from the appliqué. Slicing through it with a pin helps it come away easier. Position all of the pieces on to your foundation and then press in place.
Finish the Edges
A common finishing stitch for fusible appliqué is a narrow machine zigzag. Position the machine presser foot so the left swing of the needle will land on the appliqué shape and the right swing of the needle will land on the foundation, just on the outer edge of the appliqué shape.
To produce uniform machine-appliqué blanket stitches, sew at a slow, even pace.
Another common option is a hand blanket-stitch. Check out our embroidery section on the web site for instructions on how to do this stitch.
Continued on Page 3: Put Your Skills To Work
More to check out:
Green Pinwheels
Four-Square Pillow
Dotty Stars |
© Copyright
, 
connect with us