Cut Fabrics
Cut pieces in the following order. Click on “Download this Project” for patterns.
To use fusible web for appliquéing pieces, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out each fusible-web shape roughly 1/4" outside traced lines.
2. Following manufacturer’s instructions, press fusible-web shapes onto wrong sides of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From red bird print, cut:
2—2-1/2x18" binding strips
1—5-1/2" square
8—2-5/8" squares
From light green print, cut:
1—28-1/2x15-3/4" foundation rectangle
2—2-1/2x18" binding strips
From dark green print, cut:
1 of Pattern A
From blue print, cut:
1 of Pattern B
From pink print, cut:
1 of Pattern C
From mottled yellow, cut:
2—2-1/2x18" binding strips
8—2-5/8" squares
4 of Pattern D
From assorted green prints, cut:
2 of Pattern E
6 of Pattern F
From red prints, fussy-cut:
2 of Pattern G
1 each of patterns H and I
From red-and-yellow stripe, cut:
1—2-1/4x28-1/2" border strip
Continued on Page 3: Assemble and Appliqué Quilt Center
More to check out:
Machine-Appliqué Tips
Folk Art Needle Case
Chickens in the Coop |
